Numerical Study of Thermal Comfort Evaluation in Naturally Ventilated Classrooms
Main Article Content
Keywords
Thermal comfort, Natural ventilation, Predicted Mean Vote (PMV), Percentage of Dissatisfied (PPD), Computational Fluid Dynamics (CFD)
Abstract
The classroom is one of the important facilities in teaching and learning activities. Just like any other room, ensuring thermal comfort becomes a vital aspect for its occupants. This study aims to evaluate environmental conditions and the thermal comfort experienced by classroom occupants through numerical methods. The evaluation involves the integration of the Predicted Mean Vote (PMV) and Predicted Percentage of Dissatisfied (PPD) equations into Computational Fluid Dynamics (CFD) simulations using a user-defined function. Furthermore, extensive field measurements and questionnaire surveys are also employed to support the simulation process. The results indicate that the air temperature tends to be high, reaching 30.91°C. Meanwhile, the air velocity within the room, particularly in the occupied areas, is significantly low, with an average value of 0.04 m/s. According to the ASHRAE Standard 55, the classroom is perceived as uncomfortable, as evidenced by a PMV value of 1.38 and a PPD of 44.94%. Therefore, efforts are required to enhance the thermal comfort in the space.
Downloads
References
[2] Y. Xia, W. Lin, W. Gao, T. Liu, Q. Li, and A. Li, “Case Studies in Thermal Engineering Experimental and numerical studies on indoor thermal comfort in fluid flow : A case study on primary school classrooms,” Case Stud. Therm. Eng., vol. 19, no. March, p. 100619, 2020, doi: 10.1016/j.csite.2020.100619.
[3] I. Rahmaniar, J. Chandra, and P. Putra, “Effect of Acoustic and Thermal Comfort to Support Learning Process in a,” Procedia Eng., vol. 170, pp. 280–285, 2017, doi: 10.1016/j.proeng.2017.03.027.
[4] D. Maher, A. Hana, and H. Sammouda, “Numerical approximation of air flow , temperature distribution and thermal comfort in buildings,” Sci. African, vol. 8, p. e00353, 2020, doi: 10.1016/j.sciaf.2020.e00353.
[5] M. Alizadeh and S. M. Sadrameli, “Energy & Buildings Numerical modeling and optimization of thermal comfort in building : Central composite design and CFD simulation,” Energy Build., vol. 164, pp. 187–202, 2018, doi: 10.1016/j.enbuild.2018.01.006.
[6] N. S. Wales, S. Alghamdi, W. Tang, S. Kanjanabootra, and D. Alterman, “ScienceDirect Field investigations on thermal comfort in university classrooms in,” Energy Reports, vol. 9, pp. 63–71, 2023, doi: 10.1016/j.egyr.2022.11.156.
[7] S. Liu et al., “Improving indoor air quality and thermal comfort in residential kitchens with a new ventilation system,” Build. Environ., p. 107016, 2020, doi: 10.1016/j.buildenv.2020.107016.
[8] E. Z. E. Conceição, M. Manuela, and J. R. Lúcio, “Evaluation of thermal comfort conditions in a classroom equipped with radiant cooling systems and subjected to uniform convective environment,” vol. 35, pp. 1292–1305, 2011, doi: 10.1016/j.apm.2010.09.006.
[9] J. Eddy et al., “Thermal Environmental Conditions for Human Occupancy,” vol. 2017, 2017.
[10] I. Standard, “INTERNATIONAL STANDARD ISO,” vol. 2005, 2005.
[11] P. T. Surya, A. Surjanto, M. Arman, and K. Kunci, “Analisis Kenyamanan Termal terhadap Obyek Ruang Poli Umum di Poliklinik Politeknik Negeri Bandung,” pp. 13–14, 2022.
[12] D. Palladino, E. Moretti, C. Buratti, D. Palladino, and E. Moretti, “ScienceDirect ScienceDirect ScienceDirect ScienceDirect Prediction Of Indoor Conditions And Thermal Comfort Using CFD Prediction Of Indoor Conditions And Thermal Comfort Simulations : A Study Based On Experimental Data Simulations : A Case Study Based On Experimental Data a heat demand-outdoor Assessing the feasibility of using the temperature function for a long-term heat demand forecast,” Energy Procedia, vol. 126, pp. 115–122, 2017, doi: 10.1016/j.egypro.2017.08.130.
[13] A. El Degwy and A. Aboulmagd, “Investigations of Thermal Comfort and Air Flow Distribution in Naturally Ventilated Living Room With a Ceiling Fan,” J. Al-Azhar Univ. Eng. Sect., vol. 17, no. 65, pp. 1261–1275, 2022, doi: 10.21608/auej.2022.265714.
[14] A. Yeny and M. S. Hidayat, “KAJIAN PENGGUNAAN VENTILASI ALAMI TERHADAP KENYAMANAN TERMAL RUANG KELAS (Studi Kasus : Sdn Pondok Jagung 1 Tangerang Selatan),” Vitruvian, vol. 8, no. 3, p. 141, 2019, doi: 10.22441/vitruvian.2019.v8i3.005.
[15] A. D. Canonsburg, “ANSYS Fluent Tutorial Guide,” vol. 15317, no. January, pp. 724–746, 2016.
[16] “ANSYS Fluent Theory Guide,” vol. 15317, no. November, pp. 724–746, 2013.
[17] B. Hamzah, J. Poros Malino Km, K. Gowa, and S. Selatan, “Desain Ruang Kuliah Yang Nyaman Dan Hemat Energi,” vol. 3, no. November, pp. 47–55, 2017, [Online]. Available: https://energyplus.net.
[18] N. Izadyar, W. Miller, B. Rismanchi, and V. Garcia-hansen, “A numerical investigation of balcony geometry impact on single-sided natural ventilation and thermal comfort,” Build. Environ., vol. 177, no. April, p. 106847, 2020, doi: 10.1016/j.buildenv.2020.106847.
[19] M. Hajdukiewicz, M. Geron, and M. M. Keane, “Calibrated CFD simulation to evaluate thermal comfort in a highly-glazed naturally ventilated room,” Build. Environ., vol. 70, pp. 73–89, 2013, doi: 10.1016/j.buildenv.2013.08.020.
[20] C. Buratti, D. Palladino, and E. Moretti, “Prediction of Indoor Conditions and Thermal Comfort Using CFD Simulations: A Case Study Based on Experimental Data,” Energy Procedia, vol. 126, pp. 115–122, 2017, doi: 10.1016/j.egypro.2017.08.130.
[21] C. Yadeta, G. T. Tucho, and E. Tadesse, “Human Thermal Comfort and Its Analysis by Computational Fluid Dynamics for Naturally Ventilated Residential Buildings of Jimma Town , South West Ethiopia,” Ethiop. J. Educ. Sci., vol. 15, no. Vol 15 No 1 (2019): Ethiop. J. Educ. & Sc. Vol. 15 No 1 September, 2019, pp. 102-115., 2019, [Online]. Available: http://journals.ju.edu.et/index.php/ejes/article/view/1128
[22] A. Nathan and P. Vincenzo, “Implementing natural ventilation and daylighting strategies for thermal comfort and energy efficiency in office buildings in Burkina Faso,” Energy Reports, vol. 9, pp. 3319–3342, 2023, doi: 10.1016/j.egyr.2023.02.017.
[23] R. D. Delyuzir, Erwin, and R. Pratama, “Kenyamanan Termal Ruang Kelas Mahasiswa,” vol. 01, no. 1, pp. 1–6, 2019.
Article Sidebar
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Author’s Warranties
The author warrants that the article is original, written by the stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
Copyright
Authors retain copyright and grant to Publishers, as a publication condition. The manuscripts licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgement of the work's authorship and initial publication in IJATR.
User Rights
The International Journal of Applied Technology Research (IJATR) objective is to disseminate articles published as freely as possible. Under the Creative Commons Attribution License (CC BY-SA 4.0), this journal permits users to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in IJATR. Users will also need to attribute authors and this journal to distributing works in the journal. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in IJATR. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges and earlier and greater citation of published work.